Show simple item record

dc.contributorNevstad, Gunnar Oveen_GB
dc.date.accessioned2018-10-16T07:38:23Z
dc.date.available2018-10-16T07:38:23Z
dc.date.issued2002
dc.identifier
dc.identifier.isbn82-464-0675-2en_GB
dc.identifier.other2002/03607
dc.identifier.urihttp://hdl.handle.net/20.500.12242/1566
dc.description.abstractPBXN-109 has been produced from different RDX qualities to study properties as pot-life, mechanical properties and shock sensitivity. DYNO Industrier produced the applied RDX. The first RDX quality studied was delivered as CXM-7 product, and the obtained PBXN-109 was studied with regard to pot-life and mechanical properties. The second RDX quality applied for PBXN-109 production was an I-RDX. For this PBXN-109 product the main purpose was to determine the shock sensitivity in a Gap-test. To obtain a detonation reaction in intermediate scale Gap test the PBXN-109 based on the I-RDX needed a shock pressure of 60+2 kbar. This is a much higher pressure than 25+5 kbar needed for PBXN-109 based on standard RDX product to give the same detonation reaction. The tested PBXN-109 product has even lower sensitivity than the similar product produced with I-RDX from SNPE in France. Both PBXN-109 products containing CXM-7 and I-RDX had low viscosity and a satisfactory pot-life for casting. Obtained mechanical properties with regard to stress-strain and hardness are better than the requirement for both PBXN- 109 products.en_GB
dc.language.isonoben_GB
dc.titleTesting av sjokkfølsomhet av Dyno I-RDXen_GB
dc.subject.keywordSprengstoffer - Følsomheten_GB
dc.subject.keywordSjokkbølgeren_GB
dc.source.issue2002/03607en_GB
dc.source.pagenumber39en_GB


Files in this item

This item appears in the following Collection(s)

Show simple item record