Show simple item record

dc.contributor.authorHolmen, Lars Grønmark
dc.contributor.authorHaakestad, Magnus W.
dc.date.accessioned2017-01-04T08:45:44Z
dc.date.accessioned2017-01-05T09:23:24Z
dc.date.available2017-01-04T08:45:44Z
dc.date.available2017-01-05T09:23:24Z
dc.date.issued2016
dc.identifier.citationProceedings of SPIE, the International Society for Optical Engineering 2016, 9731en_GB
dc.identifier.urihttp://hdl.handle.net/20.500.12242/595
dc.identifier.urihttps://ffi-publikasjoner.archive.knowledgearc.net/handle/20.500.12242/595
dc.descriptionHolmen, Lars Grønmark; Haakestad, Magnus W.. Optical limiting properties of carbon disulfide at 2.05μm wavelength. Proceedings of SPIE, the International Society for Optical Engineering 2016 ;Volum 9731.en_GB
dc.description.abstractSeveral types of infrared sensors are based on sensitive focal plane arrays. In such sensors, the intensity will typically increase by a factor ~107 at the focal plane, compared to the intensity of the incoming radiation. Such arrays are thus vulnerable when illuminated with high-intensity laser pulses. One solution for protecting the array against such pulses is to use an optical limiter. We here present results where carbon disulfide (CS2) has been tested as an optical limiting material against high-energy laser pulses at 2.05 μm wavelength. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.en_GB
dc.language.isoenen_GB
dc.subjectTermSet Emneord::Optiske begrensere
dc.subjectTermSet Emneord::Karbondisulfid
dc.subjectTermSet Emneord::Væsker
dc.titleOptical limiting properties of carbon disulfide at 2.05μm wavelengthen_GB
dc.typeArticleen_GB
dc.date.updated2017-01-04T08:45:44Z
dc.identifier.cristinID1419370
dc.identifier.cristinID1419370
dc.identifier.doi10.1117/12.2206068
dc.source.issn1996-756X
dc.type.documentJournal article


Files in this item

This item appears in the following Collection(s)

Show simple item record